IBM Printer 4005 HC2 User Manual

InfoPrint Hi-Lite Color 4005-HC2  
IBM  
InfoPrint Hi-Lite Color  
4005 HC1 to 4005 HC2  
Upgrade  
-
 
InfoPrint Hi-Lite Color 4005-HC2  
IBM  
InfoPrint Hi-Lite Color  
4005 HC1 to 4005 HC2  
Upgrade  
-
 
Note  
First Edition (June 1998)  
The following paragraph does not apply to any other country where such provisions are inconsistent with local law.  
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION “AS IS” WITHOUT  
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED  
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow  
disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.  
Requests for IBM publications should be made to your IBM representative, or to your IBM branch office serving your  
locality. If you request publications from the address given below, your order will be delayed because publications are  
not stocked there.  
A Reader’ Comments form is provided at the back of this publication. If the form has been removed, you can send  
comments by fax to 1-800-524-1519, by E-mail to [email protected], or by mail to:  
IBM Printing Systems Company  
Department H7FE, Building 003G  
Information Development  
P.O. Box 1900  
Boulder CO USA 80301-9191  
IBM may use or distribute whatever information you supply in any way it believes appropriate without incurring any  
obligation to you.  
Visit our home page at: http://www.printers.ibm.com  
© Copyright International Business Machines Corporation 1997. All rights reserved.  
Note to U.S. Government Users — Documentation related to restricted rights — Use, duplication or disclosure is  
subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.  
 
Related Publications  
The following is a listing of related publications for Advanced Function Presentation.  
v PPFA User’s Guide, S544–5284  
v AFP Toolbox for Multiple Operating Systems User’s Guide, S544–5292  
v An extensive listing of available publications is included in Advanced Function  
Presentation: Printer Information, G544-3290 and Guide to Advanced Function  
Presentation, G544-3876.  
v DCF User’s Guide , S544-3191  
v OGL User’s Guide , S544-3702  
v AFP Programming Guide and Line Data Reference , S544-3884  
v Mixed Object Document Content Architecture Reference (MO:DCA) , SC31-6802  
v Intelligent Printer Data Stream Reference , S544-3417  
v InfoPrint Hi-Lite Color Introduction and Planning Guide , G544-5420  
Contact your IBM marketing representative or your IBM printing system specialist  
for information concerning other publications or associated licensed programs.  
© Copyright IBM Corp. 1997  
 
iii  
iv Upgrade Hi-Lite Color to HC2  
 
HC1 to HC2 Upgrade  
The information contained in this document is to be used by customers who are  
planning to upgrade their InfoPrint Hi-Lite Color 4005 HC1 to a InfoPrint Hi-Lite  
Color 4005 HC2.  
The HC1 has eight 1.27 mm (0.4 inch) printheads with 96 inkjets each and the HC2  
has eight 2.72 cm (1.06 inch) printheads with 256 inkjets each . The upgrade  
affects the following:  
1. Applications  
2. Supplies and Features  
3. Installation  
Applications and Machine Setup  
The HC1 applications are compatible with the HC2.  
The Setups for the HC1 must be saved (Configure HCPP) before the installation  
starts. When the HC2 has been tested, the Setups are read (Configure HCPP).  
The InfoPrint 4000 must be at level 8.523 or higher.  
Supplies and Features  
The HC1 supplies and features are not compatible with the HC2. These include ink,  
ink reservoir, and printheads. The upgrade installs one HC2 ink reservoir and eight  
HC2 printheads. Additional reservoirs and printheads are not included in the base  
upgrade. If additional ink reservoirs and/or printheads are required, these need to  
be ordered separately.  
Note: HC1 ink is not compatible with the HC2 ink, because HC1 ink causes severe  
damage to the HC2. Do not use HC1 ink in the HC2 ink reservoir.  
New ink must be available at the account before the planned installation date.  
Custom colors must go through the design process for the new ink.  
Installation  
The installation of the upgrade takes approximately 1 week. The installation activity  
requires working space. This means the following:  
1. There are two methods for the upgrade  
v Removing the HC1 from its current location so that the InfoPrint 4000 can still  
be used during the upgrade installation.  
– Time to remove the HC1 from its current position and move the  
post-processing equipment will affect the InfoPrint 4000 operation and  
must be scheduled.  
– Time to move the post-processing equipment, install the HC2, and test will  
affect InfoPrint 4000 operation and must be scheduled.  
© Copyright IBM Corp. 1997  
1
 
v Leaving the HC1 in its current location during the upgrade installation. This  
would require the InfoPrint 4000 to use its own stacker during the entire  
upgrade.  
2. A working area to accommodate the installation 3302 mm x 3633 mm (130 inch  
x 143 inch) must be provided.  
3. Additional area, large enough to accommodate unpacking and storing upgrade  
parts (approximately 3048 mm x 3048 mm (120 inch x 120 inch) must be  
provided.  
2
Upgrade Hi-Lite Color to HC2  
 
 
IBMR  
Printed in the United States of America  
on recycled paper containing 10%  
recovered post-consumer fiber.  
-
 

Haier Washer HWM8000 User Manual
Hasbro Robotics 85897 User Manual
Hotpoint Range EG54 User Manual
HP Hewlett Packard Camcorder V5061u User Manual
HP Hewlett Packard Computer Accessories TM 11 6625 2779 14amp;P User Manual
HP Hewlett Packard Network Card HP NC7770 User Manual
Husky Paint Sprayer HDS750 User Manual
Husqvarna Automobile LZ 25 User Manual
Husqvarna Brush Cutter 333RJ User Manual
Hyundai Car Stereo System H CMD4012 User Manual